Johnny's Shotgun Chokes & Forcing Cones
Services Pricing Info Barrel Requirements Contact Info
Pricing:

For Contact and Shipping info please visit my Contact Info Page.

All installations include a choke tube wrench:
Thread barrel for Screw-In Choke Tubes: $95.00 per barrel
Thread Chrome lined barrels for choke tubes (12 and 20 ga): $115.00 per barrel
Installation w/three regular flush mount tubes: $170.00
Installation in chrome lined barrels w/3 tubes: $190.00
Shorten and face single barrel, thread for tubes, drill/tap and install new bead sight: $130.00
Shorten and face chromed lined single barrel, thread for tubes, drill/tap and install new bead sight: $150.00
Shorten and face single barrel, thread for tubes, drill/tap/install new bead sight including three flush mount tubes: $195.00
Shorten and face chrome lined single barrel, thread for tubes, drill/tap/install new bead sight including three flush mount tubes: $215.00
Open fixed choke barrel: $75.00
Open fixed choke barrel (chrome lined): $95.00
Shorten and face single barrel, replace bead sight: $50.00
Lengthen/Polish forcing cone, 10 ,12 , 16, 20 ,28 , 410 ga: $85.00
Lengthen/Polish Chrome lined forcing cone 12 & 20 ga: $95.00
Lengthen/Polish non-chromed forcing cone and rechamber to 3": $115.00
Lengthen/Polish chrome lined forcing cone and rechamber to 3": $135.00
Polish already lengthened Forcing Cone: $40.00
Polish entire bore: $60.00
Polish forcing cone and bore: $85.00
Stuck choke tube removal (May destroy tube): $50.00
Flush Mounted tubes, each: $25.00
Extended Elite Ported Tubes: $45.50
Extended Turkey Tubes: $45.00
Extended Ported Turkey Tubes: $56.00
Extended Steel Shot Tubes: $27.50
Double Gun Extended Steel Shot Tubes: $27.50
Extended Rifled Slug Tubes: $49.50
Extended Stainless Bright or Black Sporting Clays Tubes: $45.00
Extended Stainless Bright or Black Ported Sporting Clays Tubes: $56.00
Choke tube speed wrench: $20.79
Choke tube lube: $7.99
Recoil pad installation, Labor: $85.00

* Ramp sight on non-ribbed barrels is an additional charge.

* Shortening and facing Double Barrels, including replacing sight and filling in voids with silver solder will vary depending on the barrels. If there is any doubt as to whether the barrels should be cut down, I will tell you and not do it. Better to be sure than sorry!

* All flush tubes designed to be installed and removed using the quarter in your pocket. Extended tubes can be screwed in and removed by hand using the extended, knurled surface. Hand tight only.

* REMEMBER: keep your tubes lubricated and NEVER shoot the gun without a tube installed!

Return shipping is normally a flat $20.00 unless shipped in an abnormally large or heavy container or extra insurance is requested. For Contact and Shipping info please visit my Contact Info Page.
Home
Pay me securely with your Visa, MasterCard, or American Express card through PayPal! Visa ,MasterCard, and American Express
"This site is operated by Ardmore Gun Repair"